3Com LINKBUILDER MSH 4 PORT ETHERNET BRIDGE MODULE Network Hardware User Manual


 
2-32 C
HAPTER
2: G
ETTING
S
TARTED
DUA1860-0AAA01
Active
IP Address:
Display Field. The bridge's current IP address. A line
of dashes indicates that no IP address has been assigned to the
bridge.
Subnet Mask:
Display Field. The bridge's current subnet mask.
Next Reset
IP Address:
Text Field. Enter the IP address you want to assign to
the bridge. It must be unique and of the form nnn.nnn.nnn.nnn
(decimal). Enter
0.0.0.0
to remove the bridge's IP address.
Changes to this field are only saved during a bridge reset, and
take effect from then on.
Subnet Mask:
Text Field. Enter the subnet mask you want to
assign to the bridge. A subnet mask is not needed unless the
network is IP routed. It must be of the form nnn.nnn.nnn.nnn
(decimal). Changes to this field are only saved during a bridge
reset, and take effect from then on.