Filter
Top Products
DUA1860-0AAA01
Viewing UDP Statistics 5-45
Viewing Diagnostic Information
Error Log
Select MONITORING from the Main Menu. Select DIAGNOSTICS
from the Monitoring menu. Select ERROR LOG from the
Diagnostics menu.
The Error Log screen is shown in Figure 5-26
. You use this screen
for viewing start-up errors and logged errors. When a bridge is
booted up, it runs through a series of diagnostics that, if faulty,
are recorded in this screen.
Any errors recorded here that impede the boot-up process
indicate a problem that should be reported.
Figure 5-26
Error Log
Press Any Key and <Return> for More Errors:
Text Field.
Press a key and press [Return] to view more logged hardware
errors. Use this when the first Error Log screen is full.
Approximately two full screens of logged errors will display. When
both screens are full of logged errors, newly logged errors begin
to appear at the top of the first screen. The error log operates on
a first-in first-out (FIFO) basis.