3Com LINKBUILDER MSH 4 PORT ETHERNET BRIDGE MODULE Network Hardware User Manual


 
3-14 C
HAPTER
3: A
DVANCED
B
RIDGING
DUA1860-0AAA01
Set Type:
Text Field (
inclusion
/
exclusion
). Enter the filter
set's type. You can define a filter set by inclusion or exclusion.
Enter
inclusion
to define the filter set as inclusion, or
exclusion
to define the filter set as exclusion. The default is
inclusion
.
For example, if you want to allow communication between a few
devices and a port, list the devices and define the set by inclusion.
If, however, you want to disallow communication between just a
few devices and a port, list the devices and define the set by
exclusion.
Host Name:
Text Field. Enter the host name for the device you
want in your filter set. Each host name / host address pair must be
unique across all set tables. You cannot have more than one
name for the same host address, nor can you have the same
name for multiple addresses. The host name / host address pair
will be added to the bridge's host table if it does not already
appear.
Host Address:
Text Field. Enter the host address for the device
you want in your filter set. The format is nn-nn-nn-nn-nn-nn
(hexadecimal).
Do not enter broadcast or multicast addresses in this field. Use
Multicast-to-Port filtering to do this.
Add/Remove:
Text Field (
A
/
R
). To add the device that you've
entered, to the filter set, enter
A
. To remove a device from the
filter set, enter
R
. The device who's host name is in the HOST
NAME field, and host address is in the HOST ADDRESS field will
be added or removed from the filter set.
Remove Set:
Text Field. Enter
y
to remove all the members from
the set.