3Com LINKBUILDER MSH 4 PORT ETHERNET BRIDGE MODULE Network Hardware User Manual


 
A
BOUT
T
HIS
G
UIDE
Introduction
This guide contains all the information you need to install and use
the LinkBuilder MSH 4 Port Ethernet Bridge Module. It is written
for the person responsible for the management and maintenance
of the network.
The guide explains:
How to configure the 4 Port Bridge Module.
How to identify 4 Port Bridge Module problems and possible
solutions to these problems.
The guide does not explain:
How to design your network.
How to install and use the LinkBuilder MSH chassis, its Power
Supply Units, the Management Module or any other modules.
Refer to the guides listed in the Useful Publications section.
The quick reference guide that also accompanies this guide
duplicates some of the information from this guide. As it is
intended for reference use, we recommend that it is stored in the
holder underneath the LinkBuilder MSH chassis.
Throughout this guide, we assume that you are familiar with the
concepts and operation of your Local Area Network. For VT100
and Telnet management, we also assume that you are familiar
with the VT100 management interface.