Filter
Top Products
Viewing Device Properties 31
16 To edit a Trap Destination, enter the IP address of your SNMP management
console in the field. This eliminates the need to build a Trap Destination Table via a
Management Information Database (MIB) browser.
In order for an SNMP Management Tool to communicate with an NJ240FX in
SNMPv3 mode, you will first need to create an SNMPv3 Profile on the NJ240FX.
Please note that, as with passwords, these stored profiles will not be displayed, so
it is advised that you make note of the details of your saved profiles. You can store
up to 14 SNMPv3 User Profiles on your NJ240FX, and you can add, modify or
delete a profile.
To create a profile, enter the desired User Name, with the appropriate
Authentication and Privacy Protocol, and passwords if required. These protocols
and passwords are not required, but must match the corresponding settings on
the SNMP Management Tool you wish to use for communication with the
IntelliJack. Once you have selected the appropriate options for the profile, you can
either save it as a new profile by selecting Apply. You can also modify the settings
of a profile previously stored with the specified User name, by selecting the Edit
operation, and then selecting Apply.
You can use the Delete option to create space in the database, by deleting
previously stored profiles. To do this, you enter the name of the profile and select
Delete Operation, followed by Apply. To delete a profile, you only need to enter
the profile name, you do not need to enter any other parameters.