Filter
Top Products
Changing Device Configuration 49
The values that remain unchanged when you click Restore Base Configuration are:
• Group Name
• Location Name
• Password
• IP Address
• DHCP Settings
• SNMP Get, Set, and Trap Community Strings
• SNMP Trap Destination IP Address
• Subnet Mask
• Gateway
• Device Log (stored in EEPROM)
• Management Port VID
ATU Table Blank
VTU Table Blank
All RADIUS settings Blank
802.1X Supplicant Status Disabled
802.1X Supplicant User Name and
Password
Blank
Port Setting Default Value
State Forwarding
Link Auto negotiation
Flow Control Off
MDI[X] Force MDI
Multicast Limit 3%
Priority Lookup Tag & IPV4
Port Priority 0 or 1
VLAN ID 1
802.1Q VLAN Mode Disable VLANs
Data Rate Limit All frames
Maximum Data Rate No limit
Global Setting Default Value