Filter
Top Products
34 CHAPTER 4: USING THE CENTRAL CONFIGURATION MANAGER
System Log Settings Tab
19 Click on the System Log Settings tab to display the following window:
20 If the CCM is operating in IPv6 mode, then the screen will present an IPv6
formatted address field. The NJ240FX will store only one set of System Log server
addresses, either an IPv4 set or an IPv6 set. The last type of address that was
written to the unit is what will be stored.
21 Click Apply to save any changes you make, and a configuration summary dialog
box will appear. Verify the information and click OK.
22 Click Exit to close the Device Property window.
NOTE: You are able to see the IPv4 type addresses only when the CCM is
operating in IPv4 mode. Similarly, the IPv6 addresses can only be seen when the
CCM is operating in IPv6 mode.