Filter
Top Products
Introducing the BIOS
User’s Manual
3-13
Report No FDD For WIN 95:
When using Windows
®
95 without a floppy drive set this item to Yes. Otherwise, set it to No. The default
setting is No.
Video BIOS Shadow:
This option is used to define whether the BIOS on the video card uses the shadow feature or not. You
should set this option to Enabled, otherwise the display performance of the system will greatly decrease.
Computer Knowledge: SHADOW
What is the SHADOW? The BIOS of standard video or interface cards is stored in ROM, and it is
often very slow. With the Shadow feature, the processor reads the BIOS on the VGA card and copies
it into RAM. When the processor runs this BIOS, the operation is speeded up.
Delay IDE Initial:
This item is used to support some old models or special types of hard disks or CD-ROMs. They may need
a longer amount of time to initialize and prepare for activation. Since the BIOS may not detect those
kinds of devices during system booting. You can adjust the value to fit such devices. Larger values will
give more delay time to the device. The minimum number you can enter is 0, the maximum number you
can enter is 15. The default setting is 0.
Small Logo(EPA) Show:
Two options are available: Disabled or Enabled. The default setting is Disabled. If you set to Enabled,
when computer reboot then you can see the EPA logo on the up right corner of the screen.