Filter
Top Products
Introduction of SD7-533 Features
User’s Manual
1-3
7. Miscellaneous
! ATX form factor
! One AGP slot, five PCI slots
! Built-in IrDA TX/RX header
! Two built-in SM-Bus header
! Hardware monitoring：Included fan speed, voltages, processor and system environment temperature
! Board size: 305 * 230mm
# The Switching Power Supply must meet ATX 2.03 specification with ATX12V1 Power
connector.
# Supports Wake On LAN, Modem, but your ATX power supply 5V standby power must be
able to provide at least a 720mA current capacity. Otherwise, the functions may not work
normally.
# This motherboard supports the standard bus speeds of 66MHz/100MHz/133MHz that are used
by specific PCI, processor and chipset specifications. Exceeding these standard bus speeds is
not guaranteed due to the specific component specifications.
# Specifications and information contained in this manual are subject to change without notice.
Note
All brand names and trademarks are the property of their respective owners.
1-3. Item Checklist
Check that your package is complete. If you discover any damaged or missing items, please contact your
retailer or dealer.
$ One ABIT SD7-533 Motherboard
$ One 80-wire/40-pin ribbon cable for master and slave Ultra DMA 100, Ultra DMA 66 or Ultra DMA
33 IDE devices
$ One ribbon cable for 3.5” floppy disk devices
$ One compact disc for support drivers and utilities
% One CA-20 back panel plate with cables (Optional)
$ One user’s manual for the motherboard