Filter
Top Products
Novell NetWare
19
(f) Exit PCONSOLE
4. Configure the Print Server
(a) Run the PSCONFIG program
(b) Select your Print Server.
(c) Select Set to NetWare Remote Printer Mode.
(d) Enter the NetWare Print Server Name selected in Step 2 (b) for all print ports.
(e) Select Execute Setup.
5. Unload and Reload Pserver
If the NetWare Pserver, to which the Print Server has been installed, has been
previously loaded, you must unload and reload it. If the NetWare Pserver has not
been loaded you must load it. If unloading and reloading the NetWare Pserver go
to step (a). If loading for the first time, go to step (d).
(a) Go to the file server console where the NLM is running
(b) Press Alt-ESC until you get to the Print Server NLM screen.
(c) Press ESC to halt the print server NLM. Answer Yes.
(d) Once the NetWare NLM has been unloaded, enter the following command:
load pserver XXXX
XXXX is the NetWare print server selected in step 2 (b).
(a) When the Enter Print Server Name menu appears, press INSERT until you get
to Contents of Current Context. Select the context that holds the print server.
Select the print server from the list and press ENTER.