Filter
Top Products
TCP/IP
27
Logical Printer Setup
Physical Port
(0100 L1_PROUT)
Print Server Port to which the printer is attached
(P1 to P3 for parallel ports and SP for the serial
port).
String Before Job
(0101 L1_PREST)
The printer control string (in hex) to be sent to
the printer before each print job.
String After Job
(0102 L1_POSTR)
The printer control string (in hex) to be sent to
the printer after each print job.
Convert LF to CR+LF
(0103 L1_CHGLF)
If ON, LF (line feed) characters are changed to
CR+LF (carriage return + line feed). If OFF, no
conversion is done.
The maximum size of a printer control string is 15 characters.
Logical Printers
Print Server models with 1 parallel port support 3 Logical Printers, otherwise they
support 8 Logical Printers. The names (L1..L8) cannot be changed. Each Logical
Printer has 4 settings as shown above. The line numbers in the Print Server’s
CONFIG file are as follows:
Logical Printer Line Numbers
L1 0100 to 0103
L2 0120 to 0123
L3 0140 to 0143
L4 0160 to 0163
L5 0180 to 0183
L6 0200 to 0203
L7 0220 to 0223
L8 0240 to 0243