Filter
Top Products
Print Server User’s Guide
58
NetBeui
This section describes configuration and operation using the NetBeui protocol.
Device Configuration
If you are using the NetBeui protocol, no device configuration is necessary.
Software Installation
Windows 95/Windows NT
1. Run the SETUP program in the Driver\ptp_95nt folder on the CD-ROM.
2. At the Select Components window, select the NetBeui protocol.
3. The setup program will do the following:
• Create the following icons: Readme, UnInstall, and Setbox (if the Setbox
installation option was selected).
• Add the driver, prtserv.dll, to the Windows\System directory (Win 95) or
Windows\System32 directory (Windows NT).
• Add the Uninstall program to the Windows directory.
• Add Uninstall information files, the Setbox program (if installed) and the
Readme file to the installation directory.
Windows for Workgroups
The following procedure will install the Pserver program. This program is required
on every Windows for Workgroups system requiring access to the Print Server’s
printers.
1. Run the Setup program in the Driver\Ptp_wfw directory on the CD-ROM.
2. Follow the on-screen instructions to complete the installation. It is not necessary
to reboot your system.
3. The Setup program will:
• Copy all program files to the installation directory.
• Copy Uninstall information files and UNINST16.EXE to the installation
directory.
• Create a Program Group, Print Server, containing an icon for the Pserver
program.
4. Because the Pserver program needs to be loaded to access the Print Server's
printers, it is recommended that you copy the Pserver icon to your Start Up
group. It will then be loaded every time you start Windows.
Software Configuration
Windows 95/NT 4.0
This procedure must be carried out on every workstation requiring access to the Print
Server’s printers. The Print Server driver must be installed first. The process is
identical in Windows 95 and Windows NT 4.0. The sample screens are from
Windows 95.