Filter
Top Products
28
ES4626/ES4650 Shell support fuzzy match in searching command and keyword.
Shell will recognize commands or keywords correctly if the entered string causes no
conflict.
For example:
1. For Admin configuration command “show interfaces status ethernet 1/1”,
typing “sh in status e 1/1” will work
2. However, for Admin configuration command “show running-config”, the
system will report a “> Ambiguous command!” error if only “show r” is
entered, as Shell is unable to tell whether it is “show rom” or “show
running-config”. Therefore, Shell will only recognize the command if “sh ru”
is entered.
1.2.2 WEB Interface
ES4626/ES4650 has HTTP Web management function. Users can configure and
examine the switch through a Web browser.
By conducting the following configurations, users can realize the Web management.
1. Configure valid IP address, network mask and default gateway for the switch.
See 5.3
2. Configure management user name and password.
3. Establish a connection to the switch through Web browser. Input username and
password. Then users can manage the switch through Web browser.
1.2.2.1 Main page
After passing the authentication by inputting username and password, users can see
the management page as below. On the management page, the main menu is on the left
and the system information and parameters are shown on the right. Click the links on the
main menu, users can see the corresponding configuration statistics.