Filter
Top Products
504
17.2 VRRP Configuration
17.2.1 VRRP Configuration Task Sequence
1. Create/Delete virtual router (required)
2. Configure VRRP virtual IP address and VRRP interface (required)
3. Enable/disable virtual router (required)
4. Configure VRRP authentication (optional)
5. Configure VRRP accessorial parameters (optional)
（1）Configure VRRP preempt mode
（2）Configure VRRP priority
（3）Configure VRRP timer
（4）Configure VRRP monitored interface
1. Create/Delete virtual router
Command Explanation
Global Mode
[no] router vrrp <vrid> Create/Delete virtual router
2. Configure VRRP virtual IP address and interface
Command Explanation
VRRP Mode
virtual-ip <ip> {master| backup}
no virtual-ip
Configure VRRP virtual IP address; the
“no virtual-ip” command removes virtual
IP address
interface{IFNAME | Vlan <ID>}
no interface
Configure VRRP interface; the “no
interface” command removes the
interface
3. Enable/disable virtual router
Command Explanation
VRRP Mode
enable Enable virtual router
disable Disable virtual router
4. Configure VRRP authentication
Command Explanation
Interface Mode