Filter
Top Products
314
no mls qos trust
status of the port.
mls qos cos {<default-cos> }
no mls qos cos
Configure the default CoS
value of the port; the “no
mls qos cos” command
restores the default setting.
service-policy {input <policy-map-name> | output
<policy-map-name>}
no service-policy {input <policy-map-name> |
output <policy-map-name>}
Apply a policy map to the
specified port; the “no
service-policy {input
<policy-map-name> |
output
<policy-map-name>}”
command deletes the
specified policy map applied
to the port. Egress policy
map is not supported yet.
mls qos dscp-mutation <dscp-mutation-name>
no mls qos dscp-mutation <dscp-mutation-name>
Apply DSCP mutation
mapping to the port; the “no
mls qos dscp-mutation
<dscp-mutation-name>”
command restores the
DSCP mutation mapping
default.
5. Configure queue out method and weight
Command Explanation
Interface Mode
queue bandwidth <weight1 weight2
weight3 weight4 weight5 weight6
weight7 weight8>
noqueue bandwidth
Set the WRR weight for specified egress
queue; the “no wrr-queue bandwidth”
command restores the default setting.
queue mode strict
priority-queue out
no priority-queue out
Configure queue out method to pq
method; the “no priority-queue out”
command restores the default WRR
queue out method.
queue mode wrr
restores the default WRR queue out
method
Global Mode
wrr-queue cos-map <queue-id> <cos1 ...
cos8>
no wrr-queue cos-map
Set CoS value mapping to specified
egress queue; the “no wrr-queue
cos-map” command restores the
default setting.
6. Configure QoS mapping
Command Explanation
Global Mode