Filter
Top Products
54
no ip address <ip_address> <mask>
[secondary]
[secondary]” command deletes VLAN
interface IP address.
2. BootP configuration
Command Explanation
ip address bootp
no ip address bootp
Enable the switch to be a BootP client and
obtain IP address and gateway address
through BootP negotiation; the “no ip
bootp-client enable” command disables
the BootP client function.
3.DHCP
Command Explanation
ip address dhcp
no ip address dhcp
Enable the switch to be a DHCP client and
obtain IP address and gateway address
through DHCP negotiation; the “no ip
dhcp-client enable” command disables
the DHCP client function.
2.3.2 Commands for Configuring Switch IP
Addresses
2.3.2.1 ip address
Command: ip address <ip-address> <mask> [secondary]
no ip address [<ip-address> <mask>] [secondary]
Function: Set the IP address and mask for the specified VLAN interface; the “no ip
address <ip address> <mask> [secondary]” command deletes the specified IP address
setting.
Parameter: <ip-address> is the IP address in dot decimal format; <mask> is the subnet
mask in dot decimal format; [secondary] indicates the IP configured is a secondary IP
address.
Default: No IP address is configured upon switch shipment.
Command mode: VLAN Interface Mode
Usage Guide: A VLAN interface must be created first before the user can assign an IP
address to the switch.
Example: Set 10.1.128.1/24 as the IP address of VLAN1 interface.