Filter
Top Products
Chapter 2 35
Onboard Devices Configuration
The Onboard Devices Configuration screen contains parameters settings for
your hardware connection devices.
Note:
The parameters in this screen are for advanced users only. You
do not need to change the values in this screen because these
values are already optimized.
PnP OS Set it to Enabled if the computer works on Win95, Win98, or
Win NT 5.0. For any other OS, set it to Disabled.
Options:
Enabled
or Disabled
Boot Drive
Sequence
Allows you to set the sequence wherein the computer will
boot 1st, 2nd, and so on. Below are possible boot devices.
Boot from CD-
ROM or DVD-
ROM
Enables boot-up from the CD-ROM or DVD-ROM drive, if
selected as the first option. The computer attempts to boot
from the CD-ROM or DVD-ROM drive (looks for a bootable
CD-ROM) before following the boot sequence specified in the
Boot Drive Sequence.
Floppy Enables boot-up from the floppy disk drive, if selected as the
first option. The computer attempts to boot from the floppy
disk drive (look for a bootable floppy) before following the
boot sequence specified inthe Boot Drive Sequence.
Hard Disk Enables boot-up from the hard disk drive.
Parameter Description