Filter
Top Products
Chapter 3 53
Disassembly Procedure Flowchart
The flowchart on the succeeding page gives you a graphic representation on
the entire disassembly sequence and instructs you on the components that
need to be removed during servicing. For example, if you want to remove the
system board, you must first remove the keyboard, then disassemble the
inside assembly frame in that order.
.
START
Middle Cover
(short)
Hinge caps
Modem
Cover
DIMM Door
Battery
Pack
LED Board
Cable from M/B
Internal MIC
from M/B
LCD FPC Cable
from M/B
Battery
Door
DIMM
Module
Modem
Board
Middle Cover
(Long)
Keyboard
LED Board
Internal
Microphone
LCD Bezel
LCD Module
LCD & Inverter
board
LCD FPC Cable
LED Board
Cable
LCD Panel
Inverter Board
Main Unit
(see next page)
86.1A522.140 *2
Screw MACH PAN M2*14L
86.1A353.135 *2 Screw
MACH PAN M2.5 *13.5L
86.9A353.6R0 *5
Screw M2.5*6L B/ZN
86.9A522.4R0 *2 Screw
MACH PAN M2*4L
86.1A353.160 *2 Screw
MACH M2.5*L16
86.9A522.4R0 *2 Screw MACH
PAN M2*4L
86.9A524.5R0 *4 Screw M3*5L