Filter
Top Products
Setup Utility
Chapter 5 Software 91
The following table describes the parameters in this screen.
Settings in boldface are the default and suggested
parameter settings.
Parameter Description
User
Password is
When set, this password protects the computer
and this Setup Utility from unauthorized entry.
When Password on boot and/or Password check
during Resume is enabled, you need to enter this
password to continue operation.
Before setting the user password, you need to set
the Supervisor Password.
Options: Disabled or Enabled
Supervisor
Password is
When set, this password protects the computer
and this Setup Utility from unauthorized entry. It
also protects certain parameters in the Setup
Utility.
When Password on boot and/or Password check
during Resume is enabled, you need to enter this
password to continue operation.
Options: Disabled or Enabled
Set
Supervisor
Password
Press Enter to set the supervisor password. See
“Setting a Password” on page 92 on how to set a
password.
Set User
Password
Press Enter to set the user password. See “Setting
a Password” on page 92 on how to set a
password.
Password
on boot
When enabled, the computer prompts you for a
password when the computer boots up.
Options: Enabled or Disabled
Password
check
during
Resume
When enabled, the computer prompts you for a
password when the computer resumes from
standby or hibernation mode.
Options: Disabled or Enabled
700-e.book : 700-5e.fm Page 91 Tuesday, July 28, 1998 10:24 AM