Filter
Top Products
Frequently-Asked Questions
102 User’s Guide
The infrared port does not work.
Check the following:
❑
Make sure that the infrared ports of the two devices are
facing each other (+/- 15 degrees) a maximum of 1 meter
apart.
❑
Make sure there is a clear path between the two infrared
ports. Nothing should be blocking the ports.
❑
Make sure you have the appropriate software running
on both devices (for file transfers) or you have the
appropriate drivers (for printing to an infrared printer).
❑
During POST, press F2 to access the Setup Utility. Go to
the Advanced screen and verify that the infrared port is
enabled.
❑
Make sure both devices are IrDA-compliant.
I want to set up my location to use the internal modem.
To properly use your communications software (e.g.,
HyperTerminal), you need to set up your location:
1. Open the Windows 98/Windows 95 Control Panel and
double-click on the Modems icon.
2. Click on Dialing Properties and begin setting up your
location.
Refer to the Windows 98/Windows 95 manual.
700-e.book : 700-6e.fm Page 102 Tuesday, July 28, 1998 10:24 AM