Filter
Top Products
Appendix B: Altos R300 Rack installation guide110
Installing the system into the rack
To install the system into a four-post rack
1 Extend the component rail from the mounting rail until the
component rail release latch clicks (1). Depress the release latch
and slip the component rail out of the mounting rail (2). Do the
same thing to the other mounting rail (3).
Note: The mounting rails allow the system to slide in and out of
the rackmount for maintenance purposes.
Each mounting rail consists of a fixed outer piece that is screwed
onto the mounting bracket with a M4 x L8 metal screw and nut
and an inner sliding piece controlled by a steel ball gearing
movement.
2 Put the component rails aside.
aa r300.book Page 110 Tuesday, March 4, 2003 9:39 AM