Acer R910 Series Server User Manual


 
vi
d If the product does not operate normally when the operating
instructions are followed. Adjust only those controls that are covered
by the operating instructions since improper adjustment of other
controls may result in damage and will often require extensive work
by a qualified technician to restore the product to normal condition.
e If the product has been dropped or the chassis has been damaged
f If the product exhibits a distinct change in performance, indicating a
need for service.
12 Replace the battery with the same type as the product's battery we
recommend. Use of another battery type may present a risk of fire or
explosion. Refer battery replacement to a qualified service technician.
13 Warning! Batteries may explode if not handled properly. Do not
disassemble or dispose of them in fire. Keep them away from children and
dispose of used batteries promptly.
14 Use only the proper type of power supply cord set (provided in your
accessories box) for this unit. It should meet the following criteria:
An IEC 320 C13 connector to plug into the power supply on the server.
For North America or similar electrical distribution systems: UL listed/
CSA certified, 16/3 type SJT/SO, with NEMA 6-15P SPT-2, or equivalent
attachment plug.
For Europe or similar electrical distribution systems: VDE certified or
HAR rated 250V, 3 x 1.0mm2 minimum conductor size, rather for no
less than the product ratings.
Maximum length is 14.76 feet (4.5 meters).