Filter
Top Products
Machine Maintenance 3-61
Replacing the HDD Module 0
NOTE:
NOTE:
For models that have SSD disk drive installed, please proceed to page 3-64, “Replacing
the SSD Module”
1. Place the HDD module in the bracket (1) and then secure the HDD bracket using four
screws (2).
Figure 3-98. HDD Bracket Screws
2. Connect the cable to the HDD module.
Figure 3-99. HDD Cable
Table 3-98. Screws
Step Screw Quantity Screw Type
HDD Bracket Reassembly M3 x L4 4