Filter
Top Products
3-50 Machine Maintenance
Replacing the WLAN Board 0
NOTE:
NOTE:
For models that have M-SATA board installed, please proceed to page 3-51, “Replacing
the M-SATA Board.”.
1. Place the WLAN board in its slot in the upper case.
Figure 3-79. WLAN Board
2. Connect the WLAN & mini 1 cables (1) to the WLAN board, then press the connector latch
(2) until it locks into place.Connect the power cable to the WLAN board (3).
Figure 3-80. WLAN, Mini 1 & Power Cables