Filter
Top Products
3-18 Machine Maintenance
Removing the DC-In Module (M-SATA Board) 0
1. Perform the “Removing the Lower Case” procedure described on page 3-9.
2. Perform the “Removing the Battery Pack” procedure described on page 3-10.
3. Disconnect the DC-In cable from the M-SATA board & the mainboard (1) then release the
DC-In cable from the self adhesive tape securing it (2).
Figure 3-20. DC-In Cable (M-SATA Board)
4. Detach the DC-In socket from the upper case.
Figure 3-21. DC-In