Filter
Top Products
Machine Maintenance 3-27
Removing the Mainboard 0
1. Perform the “Removing the Lower Case” procedure described on page 3-9.
2. Perform the “Removing the Battery Pack” procedure described on page 3-10.
3. Release the connector latch (1) from the mainboard, then disconnect the touchpad cable (2).
Figure 3-37. Touchpad Cable
4. Release the connector latches (1) from the mainboard, then disconnect the WLAN & mini
1 cables (2). Disconnect the power cable from the mainboard (3).
Figure 3-38. WLAN, Mini 1 & Power Cables