Filter
Top Products
Machine Maintenance 3-39
Removing the Middle Cover Assembly 0
1. Perform the “Removing the Lower Case” procedure described on page 3-9.
2. Perform the “Removing the Battery Pack” procedure described on page 3-10.
3. Perform the “Removing the Left and Right Speakers” procedure described on page 3-13.
4. Perform the “Removing the WLAN Module” procedure described on page 3-15.
5. Perform the “Removing the DC-In Module (WLAN Board)” procedure described on
page 3-17.
6. Perform the “Removing the HDD Module” procedure described on page 3-19.
7. Perform the “Removing the Card Reader Board” procedure described on page 3-25.
8. Perform the “Removing the Mainboard” procedure described on page 3-27.
9. Perform the “Removing the Keyboard” procedure described on page 3-36.
10. Perform the “Removing the Power Button Board” procedure described on page 3-38.
11. Remove the four screws securing the middle cover assembly to the upper case.
Figure 3-60. Middle Cover Assembly Screws
Table 3-60. Screws
Step Screw Quantity Screw Type
Middle Cover Disassembly M2 x L3 4