Filter
Top Products
Machine Maintenance 3-19
Removing the HDD Module 0
NOTE:
NOTE:
For models that have SSD disk drive installed, please proceed to page 3-22, “Removing
the SSD Module”.
1. Perform the “Removing the Lower Case” procedure described on page 3-9.
2. Perform the “Removing the Battery Pack” procedure described on page 3-10.
3. Release the HDD cable from the adhesive tape securing it.
Figure 3-22. HDD Cable Adhesive Tape
4. Grasp the plastic tab and use it to disengage the HDD cable from its connector.
Figure 3-23. HDD Cable