Filter
Top Products
Machine Maintenance 3-41
Removing the LCD Module 0
1. Perform the “Removing the Lower Case” procedure described on page 3-9.
2. Perform the “Removing the Battery Pack” procedure described on page 3-10.
3. Perform the “Removing the Left and Right Speakers” procedure described on page 3-13.
4. Perform the “Removing the WLAN Module” procedure described on page 3-15.
5. Perform the “Removing the DC-In Module (WLAN Board)” procedure described on
page 3-17.
6. Perform the “Removing the HDD Module” procedure described on page 3-19.
7. Perform the “Removing the Card Reader Board” procedure described on page 3-25.
8. Perform the “Removing the Mainboard” procedure described on page 3-27.
9. Perform the “Removing the Keyboard” procedure described on page 3-36.
10. Perform the “Removing the Power Button Board” procedure described on page 3-38.
11. Perform the “Removing the Middle Cover Assembly” procedure described on page 3-39.
12. Tilt the upper case until it is approximately at a 45° angle with the LCD assembly.
Figure 3-63. Upper Case Assembly