Filter
Top Products
Global OBD II Diagnostics
4 – 14 • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •
4
4
CODE LOOKUP
Code Lookup
is used to look up definitions of Diagnostic Trouble Codes
(DTCs) stored in the Scan Tool. The scan tool does not require power from the
vehicle to perform this function. Internal battery power can be used.
To look up DTC definitions, select
Code
Lookup
from the OBDII Function List.
When entering codes, all characters
must be entered. Only one character
can be changed at a time.
❒ Use arrow keys to scroll to the desired character.
❒ Use the arrow keys to change the selected character.
Press
when done.
Use the
arrow keys to dis-
play the previous or next DTC. The
DTCs for the code type selected (i.e., P,
B, C, or U) are listed in numerical order.
To enter another DTC number, press
the
key. Press the key
again to return to the OBDII Function
List.
If the DTC definition does not exist for
the vehicle, then a message, NO DTC
DEFINITION FOUND, displays on the
screen.
If the DTC is manufacturer specific, the
system the DTC is assigned to dis-
plays. You need to refer to an appropri-
ate service manual for the exact
definition.