Adaptec ANA-5940 Network Card User Manual


 
1-1
ANA-5910/5930/5940 User’s Guide
Stock Number: 510694-00, Rev. C Page: 1-1
Print Spec Number: 493081-00
Current Date: 5/28/97 ECN Date: 05/29/97
1
▼▼▼▼
Getting Started
This document contains information on installing and configuring
the Adaptec
®
ANA
-5910/5930/5940 adapters. These adapters
provide the interface between your computer’s PCI bus and a
network that uses Asynchronous Transfer Mode (ATM). Procedures
in this document describe installing the adapter, installing and
configuring the adapter drivers, and performing administrative and
management functions for your ATM network.
Note:
The procedures in this document assume that you are
connecting the adapter to an external ATM local area
network (LAN) switch.
System Requirements
Certain hardware and software components are required to use the
ANA-5910/5930/5940 adapters.
Hardware Requirements
The minimum hardware system requirements are as follows:
PCI rev. 2.0-compliant computer with +5V PCI slots for the
ANA-5910 and +5V/+12V PCI slots for the ANA-5930/5940
An available PCI bus master slot