Filter
Top Products
4-15
Installing ATM Version 4.0x Software for Windows NT
ANA-5910/5930/5940 User’s Guide
Stock Number: 510694-00, Rev. C Page: 4-15
Print Spec Number: 493081-00
Current Date: 5/28/97 ECN Date: 05/29/97
aatmcnfg.exe
The
aatmcnfg.exe
utility is used for configuring the
atmo.sys
driver.
The following is the syntax for using this utility:
aatmcnfg [-f ConfigFile] -[x n] -[s | d | p | q | a]
Options:
Use the
-q
option only if you do not want to use SVCs and if you do
not want to register with a switch, as in back-to-back connections or
when running diagnostics. Use the
-a
option if your switch does not
support address registration. Use the
-f ConfigFile
option to start the
atmo.sys
driver with a database file other than the default
base.db
,
for example,
trial.db
.
Note:
When you run the utility
aatmcnfg
without options,
the driver registers with the switch. If the driver fails to
register with the switch, enter
aatmcnfg -s
to stop the driver
then try starting it again.
-s shutdown
-d debug
-p print status
-q no signalling
-a no address registration
-x n delete PVC channel n