Adaptec ANA-5940 Network Card User Manual


 
4-6
ANA-5910/5930/5940 User’s Guide
ANA-5910/5930/5940 User’s Guide
Stock Number: 510694-00, Rev. C Page: 4-6
Print Spec Number: 493081-00
Current Date: 5/28/97 ECN Date: 05/29/97
Reconfiguring a LANE Client
To reconfigure a LANE clien:
1
From the Control Panel window, double-click on the Network
icon.
2
From the Network Settings dialog box, select the Adapters tab.
3
Select the LANE adapter you want to reconfigure, for example,
Adaptec LANE Adapter (ELAN 0), and then select Properties.
4
Change any editable parameter as described in the installation
procedures previously in this chapter.
Removing a LANE Client
To remove the LANE client:
1
From the Control Panel window, double-click on the Network
icon.
2
From the Network Settings dialog box, select the Adapters tab.
3
Select the LANE adapter you want to remove, such as Adaptec
LANE Adapter (ELAN 0), from the Installed Adapter Cards
drop-down list, and then select Remove.
4
Select Yes.
5
In the Network Settings dialog box, select Close.
6
Select Yes.
7
If you want to reinstall the adapter you just removed, you
must restart Windows NT and follow the procedures for
installing additional clients.