Filter
Top Products
3-5
Installing the Adapter
ANA-5910/5930/5940 User’s Guide
Stock Number: 510694-00, Rev. C Page: 3-5
Print Spec Number: 493081-00
Current Date: 5/28/97 ECN Date: 05/29/97
Connecting to the ANA-5930
To connect the ANA-5930 to an ATM switch
1
Obtain the connecting cable.
2
Connect the RJ-45 connector at one end of the cable to the RJ-45
socket on the ANA-5930.
Caution:
Connect only a UTP 5 cable to the ANA-5930.
3
Connect the RJ-45 connector at the other end of the cable to the
ATM wall port or directly to the RJ-45 socket on the ATM
switch, as illustrated in Figure 3-3. See your system
administrator for assistance.
Connecting to the ANA-5940
To connect the ANA-5940 to an ATM switch
1
Obtain an MMF cable with an SC connector on one end and a
connector that matches your ATM switch on the other end.
2
Remove the soft rubber cover on the back bracket of the
ANA-5940.
Caution:
Always cover open MMF cable connectors, as
dust might impair transmissions.
3
Remove the rubber terminators from the ends of the MMF
cable.
4
Attach the SC connector on the MMF cable to the MMF
connector on the back bracket of the ANA-5940, as shown in
!
!