Filter
Top Products
4-2
ANA-5910/5930/5940 User’s Guide
ANA-5910/5930/5940 User’s Guide
Stock Number: 510694-00, Rev. C Page: 4-2
Print Spec Number: 493081-00
Current Date: 5/28/97 ECN Date: 05/29/97
Installing LANE Device Drivers
LANE client drivers are installed from the Network Settings dialog
box in the Control Panel. Up to 4 clients (numbered 0 to 3) can be
installed at one time. To configure multiple clients, you must install
the first client (0) before you can install any additional client.
Installing a LANE Client Driver
Follow these procedures for installing a LANE client driver. If you
are installing the Adaptec LANE Client device driver for the first
time, your configuration address number (ELAN number) must be
assigned to (0). Additional drivers can be installed with unique
numbers 1 to 3.
1
From the Control Panel window, double-click on the Network
icon.
2
Select the Adapters tab from the Network Settings dialog box.
3
Click on the Add button to add a device driver.
4
Insert the ALANE Drivers for Windows NT diskette in the
diskette drive. Select the Have Disk button.
5
Type the drive letter of the diskette drive that contains the
ALANE Drivers for Windows NT diskette, and select OK.
6
Select Adaptec Inc. ATM LANE Adapter, and select OK.
The Adaptec LANE Configuration dialog box appears.