Adaptec ANA-5940 Network Card User Manual


 
5-11
Installing ATM Version 2.0x Drivers for Windows NT
ANA-5910/5930/5940 User’s Guide
Stock Number: 510694-00, Rev. C Page: 5-11
Print Spec Number: 493081-00
Current Date: 5/28/97 ECN Date: 05/29/97
2
Write this address down. Then replace the 20th byte (the final
byte, which is 00) with 03. Use this altered address as the ATM
ARP server address when you install the CIP client software
on all client workstations in the LIS.
The ATM ARP server address consists of the following:
The first 13 bytes are from the ATM switch. (Refer to the
switch documentation.)
The next 6 bytes are the MAC address (ESI address) of the
adapter installed in the ATM ARP server.
The MAC address also appears when you use the
aatmcnfg -p
command.
The 20th byte (the ATM ARP selector) must be different than
the CIP client selector and the ATM selector. Adaptec ATM
drivers use the following default selectors:
ARP selector (
aarp.sys
): 03
CIP client selector (
acip
): 02
ATM selector (
aatm
): 00
Reconfiguring the CIP ARP Server
To reconfigure the CIP ARP server:
1
From the Control Panel window, double-click on the Network
icon.
2
From the Network Settings dialog box, select the Services tab.
3
Select AARP Server, and then select Properties.
The Adaptec ATM ARP Server Configuration dialog box
appears.