ADIC Scalar Series Switch User Manual


 
10 Getting Started
WRITE-PROTECT
SWITCH
WRITE-ENABLED
WRITE-PROTECTED
ORANGE
INDICATOR
Figure 4. DLT Cartridge Write-Protect Switch
Install Data Cartridges
Install each of the cartridges into the library. The cartridge storage slots are designed so that you cannot
incorrectly install the cartridges.
Install Cleaning Cartridge (Optional)
If your backup software is capable of scheduling and performing a drive cleaning cycle automatically, you may
want to dedicate a cartridge storage slot to a cleaning cartridge. When all cleaning cycles on the cleaning cartridge
are exhausted (see Chapter 5: Operations and Maintenance, section Cleaning the Drive Head, for explanation of
how to determine if a new cleaning cartridge is needed), remove the cleaning cartridge and install a new one (if
equipped, use the Mailbox to exchange the cleaning cartridge).
Warning
Use only adic -approved DLT cleaning cartridges. Use of any other
cleaning cartridge may damage the drive heads and void your warranty.
Close and Lock the Front Door
Close the library door, turn the key a quarter turn to the left and remove it from the lock.