Filter
Top Products
26 Equipment Description
Set SCSI ID
Lets you select the SCSI ID for the robotics on the library.
p Use UP and DOWN to select the desired ID. Press ENTER to execute the change. Confirm the change by
pressing ENTER again.
Product Sign-On
Lets you select how the Scalar Library appears to application software. The library can be set to sign-on as an
Exabyte
®
EXB-480
™
library. This permits maximum application software compatibility.
p Use UP or DOWN to select “Y” or “N”. Press ENTER to execute the change.
Note
Product Sign-On default is EXB-480: N.
Off-Line Time
Lets you set the number of minutes the Scalar Library will remain in the Off-Line Mode. If someone leaves the
library in the Off-Line mode, after the pre-set number of minutes the library will automatically return to the On-
Line Mode. This assures that your automatic backup will be done even if the library has accidentally been left off-
line.
Note
Off-Line Time default setting is "5" minutes.
p Use UP or DOWN to select the number of minutes you wish the Scalar Library to remain in Off-Line Mode.
Press ENTER to execute the change.