ADIC Scalar Series Switch User Manual


 
Equipment Description 25
p To access the Off-Line Mode menu, press the MENU key. The display will appear as follows:
p Use the UP or DOWN keys to scroll through the menu choices. Press ENTER to select the item displayed on
the top line. Use the RIGHT or LEFT keys to scroll through fields on the same line.
p To exit the Off-Line Mode menu and return to the On-Line Mode from anywhere in the menu, press the
MENU key.
p Press ENTER to select the Configuration Menu.
Configuration Menu
The Configuration Menu allows you to select the following operating parameters:
l Buzzer Configuration l Set SCSI ID of the Library Robotics
l Product Sign-On l Off-Line Time
l Initialize Map Slots l Initialize Scan Barcodes
l Barcode Scanner
Buzzer Configuration
Enables/disables the sounding of an alarm when an error message or warning alarm is displayed. Enables/disables
the beep sound when you press a keypad key.
When you select the Buzzer Configuration option a display similar to the following appears.
p To enable the error alarm use the LEFT key to select the ErrAlarm field. Use UP or DOWN to select "Y" to
enable alarm or "N" to disable alarm. When the error alarm is enabled, a continuous alarm tone will sound in
the event of an error message. The alarm will sound until the condition that caused the error has been removed
or any key is pressed. To clear an error message from the display, press ALT and ENTER.
p If you wish to change the status of the keyboard beep, use the RIGHT key to select the Kybd field. Use UP or
DOWN to select "Y" to enable a beep when you press a key or "N" to disable the beep.
Note
Buzzer Configuration default: Err Alarm: N, Kybd: Y
p Press ENTER to make the changes effective or press ESC to return to previous menu item.