Filter
Top Products
aci_async_add() 5-7
21 Dec 2001
das_dismount
The aci_async_add function with the das_dismount
parameter dismounts a volume. See Figure 5-4.
Figure 5-4 aci_async_add Function with the das_dismount Parameter
Dismount the volume volser of defined media type from its
drive. The drive is identified by the DAS software.
For additional information, refer to
das_mount on page 5-6.
Retries can be configured in the config file or in the AMS
configuration.
See Table 5-2 for a description of the parameters for the
aci_async_add function with the das_dismount parameter.
das_force
The aci_async_add function with the das_force parameter
dismounts any cartridge from a specific drive. See Figure 5-5.
Figure 5-5 aci_async_add Function with the das_force Parameter
Force a dismount from a drive named drive, regardless of
which volser is in the drive. Refer to Table 5-3 on page 5-8.
For additional information, refer to das_dismount on page 5-7,
and das_mount on page 5-6.
Table 5-2 Parameters for the das_dismount Parameter
Parameter Description
volser volser that is to be moved from a drive to the original position in
the AML
type media type of the named volser
Refer to Media Types on page 2-7
aci_async_add (das_dismount, *volser, *type)
aci_async_add (das_force, *drive)