Filter
Top Products
aci_clientaccess 4-11
21 Dec 2001
aci_clientaccess
The aci_clientaccess function modifies the access lists of a
client. See Figure 4-6.
Figure 4-6 aci_clientaccess Function Call
See Table 4-4 for a description of the parameters for the
aci_clientaccess function call.
This ACI function changes the access lists of a client named
clientname by either adding or removing access to a drive_range
and/or a volser_range. The aci_clientstatus function may be
needed to find out the drive_range and volser_range used by the
client.
Table 4-4 Parameters for the aci_clientaccess Function Call
Parameter Description
clientname name of the client which authorization is to be changed
action type of the activity (add or remove access rights)
ACI_ADD add access rights
ACI_DELETE remove access rights
volser_range • a single volser
• multiple volsers, separated by commas
• a range of volsers separated by a hyphen
• set to empty (““ or ‘\0’) if it is not to be changed
type media type of the previously defined volser range
Refer to Media Types on page 2-7.
drive_range • a single drive
• multiple drives, separated by commas
• a range of drives separated by a hyphen, or set to empty
(““ or ‘\0’) if it is not to be changed
#include "aci.h"
int aci_clientaccess( char *clientname,
enum aci_command action,
char *volser_range,
enum aci_media type,
char *drive_range )