Filter
Top Products
aci_eject2 4-43
21 Dec 2001
If the eject area is full, the system stops the eject procedure.
Depending on the DAS_EJECTAREAFULL environment
variable on the AMU, the command will be canceled, or the
system starts with the next eject after the operator has
removed cartridges from the eject area.
The Attribute of the Coordinate will be set to ejected in the
AMU database. The compartment is now reserved for this
volser, if the compartment needs to be used for other volsers,
issue the aci_eject_complete2 function.
Use the eject stop, when the eject area is full. Depending on the
DAS_EJECTAREAFULL environment variable, the request will
either be cancelled or completed after the area is marked
empty.
For additional information, refer to aci_insert on page 4-75,
and aci_eject_ complete on page 4-49.
Return Values
• 0: The call was successful.
• -1: The call failed.
The external variable d_errno is set to one of the following
DAS error codes:
• ERPC
• EINVALID
• ENOVOLUME
• EPROBVOL
• EAMU
• EAMUCOMM
• EROBOTCOMM
• EDASINT
• ENOAREA
aci_ei_info returned information on each volser ejected
volser volser of the ejected volume
type media type of the named volser
Refer to Media Types on page 2-7
errcodes error code derrno
Table 4-16 Parameters for the aci_eject2 Function Call
Parameter Description