Section 4, User Interface Guide ATLAS 550 System Manual
130 © 2002 ADTRAN, Inc. 61200305L1-1F
MODULES MENU (DUAL NX56/64 OPTION MODULE)
The ATLAS 550 system controller automatically detects the presence of the Dual Nx 56/64 Option Module
when it is installed in the system (listed as
V35NX-2). To see the menus for the Dual Nx 56/64 Option
Module via the terminal menu, use the arrow keys to scroll to the
MODULES menu and press <Enter> to
access the module choices. Refer to the Dual Nx 56/64 Option Module Quick Start Guide for a menu tree
containing a complete listing of menus.
MODULES (V35NX-2) > INFO
Read security: 5
Provides information about the module part number, serial number, and assembly revision.
MODULES (V35NX-2) > INFO > PART NUMBER
Read security: 5
Displays the part number of the module.
MODULES (V35NX-2) > INFO > SERIAL NUMBER
Read security: 5
Displays the serial number of the module.
MODULES (V35NX-2) > INFO > ASSEMBLY REVISION
Read security: 5
Displays the assembly revision of the installed module.
MODULES (V35NX-2) > ALARM STATUS
Read security: 5
Displays the current alarm status.
MODULES (V35NX-2) > ALARM STATUS > PRT
Read security: 5
Indicates the port number.
MODULES (V35NX-2) > ALARM STATUS > ALARMS
Read security: 5
Displays an alarm condition on the ATLAS 550 unit.
S
LIP A rate mismatch exists between the DTE clock and the network-side clock (as
set by DS0 assignment).
P
LL The Nx port is not able to lock onto the clock provided by the network interface.
Z
ERO The DTE is sending an excessive number of consecutive zeroes to the network
interface.
N
O EXT CLK The DTE is not providing an external transmit clock. This alarm displays only if
the Nx port is configured to get its transmit clock from the DTE.
P
KT EP ALM A packet endpoint has detected missing or incorrect framing.
