Section 4, User Interface Guide ATLAS 550 System Manual
206 © 2002 ADTRAN, Inc. 61200305L1-1F
DLCI
Read security: 5
Displays the local address for each PVC as assigned by the carrier.
TEST
Write security: 3; Read security: 5
Displays the test mode for the PVC.
START
Write security: 3; Read security: 5
The fixed duration that Test is not running and the DLCI is not configured for continuous in-band
delay measurement. To change this option, set
DIAGNOSTIC MODE to IN-BAND DELAY
M
EASUREMENT (also see Packet Manager > Packet Endpnts > Config > Config - SDLC, In-band
Delay Measurement option).
CONTDLY
Write security: 3; Read security: 5
The fixed duration TEST is not running and the DLCI is configured for continuous in-band delay
measurement. The following
RESULTS menu accumulates these measurements.
STOP
Write security: 3; Read security: 5
The fixed duration TEST is running. The following DURATION field shows the time remaining in
the current test.
DURATION
Read security: 5
Shows the duration in seconds for the fixed-duration test.
RESULTS [MN/AV/MX DLY]
Read security: 5
Displays the minimum, average, and maximum delay for the delay-measurement test. To display the
additional test results, place the cursor over this field and press <Enter > on the keyboard. The
displayed times are in milliseconds.
ECHO PKT TX
Read security: 5
Displays the total number of test packets that have been transmitted.
ECHO PKT RX
Read security: 5
Displays the total number of test packets that have been received.
