Filter
Top Products
Section 4, User Interface Guide ATLAS 550 System Manual
96 © 2002 ADTRAN, Inc. 61200305L1-1F
SYSTEM UTILITY > CONFIG TRANSFER > SAVE CONFIG REMOTELY
Write security: 3; Read security: 5
Saves the configuration file specified in TFTP SERVER FILENAME to the server identified in TFTP SERVER
IP A
DDRESS. To start this command, enter Y. To cancel this command, enter N.
SYSTEM UTILITY > SYSTEM UTILIZATION
Write security: 0; Read security: 0
Displays statistics related to the ATLAS 550 internal operating system. Please check with ADTRAN
Technical Support before attempting to use this menu.
SYSTEM UTILITY > SYSTEM SELFTEST
Write security: 3; Read security: 5
Initiates a system self-test. The self-test consists of memory tests and data integrity tests for each installed
module.
SYSTEM UTILITY > SYSTEM SELFTEST > SELFTEST
Write security: 3; Read security: 5
Activates the self-test. To confirm self-test activation, press Y; to cancel the self-test press N.
SYSTEM UTILITY > SYSTEM SELFTEST > SELECTED TESTS
Write security: 3; Read security: 5
Allows the user to select a system-wide test or an individual card test. Choose from ALL TESTS, SLOT: 0
S
YS CTRL, or any other installed option/network/resource module.
SYSTEM UTILITY > SYSTEM SELFTEST > CURRENT TEST STATUS
Write security: 3; Read security: 5
Displays which part of self-test is currently active. See System Utility > System Selftest > View Selftest Log
for details on individual tests.
SYSTEM UTILITY > SYSTEM SELFTEST > CURRENT SLOT/PORT
Write security: 3; Read security: 5
Displays which slot and port is currently being tested.
SYSTEM UTILITY > SYSTEM SELFTEST > VIEW SELFTEST LOG
Read security: 5
Displays time-stamped log of the tests conducted and the Pass/Fail results. Self-tests verify data integrity
and processor control to each port. Each port is looped back and a data pattern is sent and tested.
Self-tests disrupt data flow.