Filter
Top Products
ATLAS 550 System Manual Section 4, User Interface Guide
61200305L1-1F © 2002 ADTRAN, Inc. 205
PACKET MANAGER > PACKET ENDPNTS > CONFIG > USAGE
Read security: 5
This field displays a 7-character summary of the references to this link. Each position is populated with a
dash (-) or a character indicating the resource represented. The characters are as follows:
PACKET MANAGER > PACKET ENDPNTS > TEST
Write security: 3; Read security: 5
Provides menus for controlling options and setting for packet endpoints.
PACKET MANAGER > PACKET ENDPNTS > TEST > ENDPNT NAME
Write security: 3; Read security: 5
Displays the name of the packet endpoint.
PACKET MANAGER > PACKET ENDPNTS > TEST > PROTOCOL
Write security: 3; Read security: 5
Displays the protocol running on the packet endpoint.
PACKET MANAGER > PACKET ENDPNTS > TEST > SUBLINK - FRAME RELAY
Write security: 3; Read security: 5
Displays test menus for the packet endpoint sublinks. The menus vary depending on the protocol. Testing
is not supported on TBOP or PPP.
RESTORE DELAY IN SECONDS
Write security: 3; Read security: 5
The amount of time within which the criteria for switching to backup are reached before service is
returned to the primary circuit.
1 Packet connection in the first dedicated map
2 Packet connection in the second dedicated map
3 Packet connection in the third dedicated map
4 Packet connection in the fourth dedicated map
5 Packet connection in the fifth dedicated map
– Reserved and currently not is use
S Used as a Packet Endpoint in the switched dial plan
U Used by one or more packet switch connections or packet voice entries
NAME
Read security: 5
Displays the user-defined name for the DLCI.