Filter
Top Products
93
the managed devices on your LAN. Here is an example screenshot:
Figure C.3: Two devices have been discovered
•
Discovery Filter:
Click the mouse pointer on ‘
Discovery Filter
’ item or press
‘Ctrl+F’ to set the ‘Discovery Type’. Here is an example screenshot:
Figure C.4: Discovery Filter setting window
There is a radio button group of three selections to set the discovery type. While ‘Local
Subnets’ radio button is selected and a specified address of local subnet is assigned,
which means once you run the function of discovering devices whose IP addresses are
in the range of the assigned subnet, will all be detected and shown in the left field. Else
if you select the ‘Primary Interface/Gateway/Default Route’ radio button, it means
you will find the devices whose IP addresses are the same subnet as the primary
interface/gateway/default route. Or you can select ‘Customize’ radio button to assign
an IP address with mask immediately. Besides, you can also mark the check box of