Filter
Top Products
27 Chapter3
3.1.2 Commands Set List
Table 3.2: Commands Set List
Command Code Word
User EXEC E
Privileged EXEC P
Global configuration G
VLAN database V
Interface configuration I
3.1.3 System Commands Set
Table 3.3: System Commands Set
Netstar Commands Level Description Example
show config E Show switch configuration switch>show config
show terminal P Show console information switch#show terminal
write memory
P
Save user configuration into
permanent memory (flash rom)
switch#write memory
system name
[System Name]
G
Configure system name switch(config)#system name xxx
system location
[System Location]
G
Set switch system location string switch(config)#system location xxx
system description
[System Description]
G
Set switch system description string switch(config)#system description xxx
system contact
[System Contact]
G
Set switch system contact window
string
switch(config)#system contact xxx
show system-info E Show system information switch>show system-info
ip address
[Ip-address] [Subnet-mask]
[Gateway]
G
Configure the IP address of switch switch(config)#ip address 192.168.1.1
255.255.255.0 192.168.1.254
ip dhcp
G
Enable DHCP client function of
switch
switch(config)#ip dhcp
show ip P Show IP information of switch switch#show ip
no ip dhcp
G
Disable DHCP client function of
switch
switch(config)#no ip dhcp
reload G Halt and perform a cold restart switch(config)#reload
default G Restore to default switch(config)#default
admin username
[Username]
G
Changes a login username.
(maximum 10 words)
switch(config)#admin username xxxxxx
admin password
[Password]
G
Specifies a password
(maximum 10 words)
switch(config)#admin password xxxxxx
show admin P Show administrator information switch#show admin
dhcpserver enable
G
Enable DHCP Server switch(config)#dhcpserver enable
Dhcpserver disable
G
Disable DHCP Server switch(config)#no dhcpserver
dhcpserver lowip [Low IP]
G
Configure low IP address for IP pool switch(config)#dhcpserver lowip 192.168.1.100
dhcpserver highip
[High IP]
G
Configure high IP address for IP
pool
switch(config)#dhcpserver highip 192.168.1.200