Filter
Top Products
49 Chapter3
Figure 3.19: Fault Relay Alarm
SNTP Configuration
You can configure the SNTP (Simple Network Time Protocol) settings. The SNTP allows you to
synchronize switch clocks in the Internet.
• SNTP Client: enable or disable SNTP function to get the time from the SNTP server.
• Daylight Saving Time: enable or disable daylight saving time function. When daylight saving time is
enabled, you need to configure the daylight saving time period.
• UTC Timezone: set the switch location time zone. The following table lists the different location time
zone for your reference.
Table 3.18: UTC Timezone
Local Time Zone Conversion from UTC Time at 12:00 UTC
November Time Zone - 1 hour 11am
Oscar Time Zone -2 hours 10 am
A
DT - Atlantic Daylight -3 hours 9 am
A
ST - Atlantic Standard
EDT - Eastern Daylight
-4 hours 8 am
EST - Eastern Standard
CDT - Central Daylight
-5 hours 7 am