Advantech EKI-7758F Switch User Manual


 
117
Figure C.42: VLAN Table
Port-based VLAN
Packets can go among only members of the same VLAN group. Note all unselected
ports are treated as belonging to another single VLAN. If the port-based VLAN enabled,
the VLAN-tagging is ignored.
In order for an end station to send packets to different VLAN groups, it itself has to be
either capable of tagging packets it sends with VLAN tags or attached to a VLAN-aware
bridge that is capable of classifying and tagging the packet with different VLAN ID
based on not only default PVID but also other information about the packet, such as the
protocol.
Click ‘Add’ button to add a new VLAN group (The maximum VLAN group is up to 64
VLAN groups)
Entering the VLAN name, group ID and grouping the members of VLAN group
Figure C.43: Port-based VLAN